fan clutch removal

Here you go

REMOVAL
Disconnect negative battery cable from battery.
NOTE:The thermal viscous fan drive/fan blade assembly is attached (threaded) to water pump hub shaft.


Remove fan blade/viscous fan drive assembly from water pump using special tool 6958 spanner wrench and 8346 adapters, by turning mounting nut counterclockwise as viewed from front. See Fig. 33. Threads on viscous fan drive are RIGHT HAND .
Fig. 33: Removing Viscous Fan & Fan Drive
Courtesy of DAIMLERCHRYSLER CORP.
Do not attempt to remove fan/viscous fan drive assembly from vehicle at this time.
Do not unbolt fan blade assembly from viscous fan drive at this time.
Remove fan shroud to radiator bolts.
Remove fan shroud and fan blade/viscous fan drive assembly as a complete unit from vehicle.
After removing fan blade/viscous fan drive assembly, do not place viscous fan drive in horizontal position. If stored horizontally, silicone fluid in the viscous fan drive could drain into its bearing assembly and contaminate lubricant.
CAUTION:Do not remove water pump pulley-to-water pump bolts. This pulley is under belt tension.


Remove four bolts securing fan blade assembly to viscous fan drive.

rasmataz; Thanks very much for your reply with the info I was needing. Maybe I can manage to change this one out now. Again Thanks

How is the best way to get the fan/shroud off? Thanks