how do i change the power steering hose

Hello,

You must use a line wrench and you will need to jack up the car, here is a video of the job being done on a similar car there are diagrams (below) that will help you get the job done.

https://youtu.be/BGBUv5r9fk0

Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed. Cheers, Ken

i have a jeep liberty limited year 2002 and i need to install a new power steering hose but all i can see is how to install a pump I know that we take the high pressure hose o at the pump but where does the other end go how do i put in a new hose on?

You SHOULD use flare nut wrenches to keep the fittings from stripping. Is it high side or low side? Threaded both ends or just on the steering gear? Here is a video on how to use a line wrench

https://youtu.be/HNlvgp_YfQ0

Please let us know what happens

Can not get the power steering pump to stop leaking after installation of the pump, hose with the o ring.

please advise

Have you replaced the O-ring? Have you checked to make sure there are no marks on the hose itself where it attaches. Here is a video on how to change the hose out (generic) and what to look for with in the instruction in the diagrams below to show you how on your car.

https://youtu.be/BGBUv5r9fk0

Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.