Hvac wiring diagram

Here is a wiring diagram and a pic of the compressor if it helps. here's so you can see the wiring diagram

The wiring diagram is for you to use and test various points in the circuit to find out where the circuit is broken and why. You will probably need a scan tool also because there are communication circuits too.

yeah i posted the wiring diagram so I kinda know what its for lol. I ohmed the wires going to the compressor 2 are for the thermal protector showing continuity and the other is ground and is showing continuity to ground. I tried jumping out the low pressure switch on the receiver I'm not sure if that would work. I know I read somewhere about jumping out something on the compressor but that was before I had this problem. Any help would be greatly appreciated.

Have you done the basics of testing for power arriving at the clutch.

not at all I do residential Hvac so I think I should be able to figure it out with a little help.
1. Test power going to the clutch
okay any other advice

I kinda wanted something like.. Check this if it has power then this is probably wrong if it doesn't check this. Something like that I posted the wiring diagram to make it easy for someone to give me details. I could figure it out myself but thought it would be easier to get a mechanics advice to make it go a lot quicker.

If you can read the diagram wrenchtec sent you then you should understand what I am about to say, If you are unsure as to what you are doing you could end up doing more damage to your vehicle, so think about it before you continue. Locate under hood fuse box. Using a volt meter check power across fuse #1 20amp if there is power across fuse #1 then remove clutch relay,turn ignition key on and with your volt meter check for 2 power sources one at position #2 and one position #3. If you have both sources, using a (fused jumper)do not use an unprotected jumper in case there is a short in the circuit as this could cause more damage to your electrical system. Jump across positions #1 and #2 and look for clutch activitation.(WARNING!!!!) DO NOT JUMP POWER TO POSITION #4 AS THIS IS A GROUND CONTROL CIRCUIT FOR THE RELAY FROM THE PCM YOU WILL DAMAGE THE PCM. If you are not comfortable with the diagram or do not understand these instruction up to this point then I would have to agree that you should bring your car to a qualified tech. If you are ok with it then this should get you started.

none of the climate controls functions work; no lights on buttons nothing works, fuses are fine, relays fine, grounds are fine. changed climate control panel, same issue. Stereo works.

lets check the power and grounds for the system. here is a guide to help do the testing with the climate control wiring diagram below:

https://www.2carpros.com/articles/how-to-check-wiring

Check out the diagrams (below). Please let us know what happens.

Im hunting for the culprit causing the condenser fan not to run. Please share wiring diagram for a/c of 96 civic.

This is a schematic of the AC system.

Tnx for the diagram.