Fault is with the Throttle Position Sensor. Testing have to be done before replacing component.
KOER & Continuous Memory DTC P1121: Check Rationality Operation Between TP & MAF Sensors
This DTC is set when the comparison between TP and MAF sensor readings are not consistent with calibrated load values during KOER self-test. Possible causes for this fault are:
• Air Leak Between MAF Sensor & Throttle Body
• TP Sensor Not Seated Fully
• Faulty TP Sensor
• Faulty MAF Sensor
Mar 11, 2011 at 12:55 PM