speedometer

2002 CHRYSLER TOWN AND COUNTRY
164,347 MILES • 6 CYL • 4WD • AUTOMATIC
Avatar
ERNIE ALLEN
  • MEMBER
  • 3 POSTS
My speedometer was fine this am. I had a bushing put on the rear leaf spring, got it back at 6pm. and it is'nt working,What would cause it to stop working just like that.
Mar 11, 2011 at 2:41 AM
Advertisement
Avatar
CARADIODOC
  • CERTIFIED EXPERT
  • 34,306 POSTS
Check if the pointer is below the stop peg.
Mar 11, 2011 at 2:51 AM
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
Check the vehicle speed sensor
Mar 11, 2011 at 2:52 AM
Advertisement
Avatar
ERNIE ALLEN
  • MEMBER
  • 3 POSTS
Is that located on the bottom side of the trans,or the big fuse box under the hood.
Mar 11, 2011 at 3:00 AM
Avatar
ERNIE ALLEN
  • MEMBER
  • 3 POSTS
How would the speedometer pointer get past the stop peg,yet it was working when I took it in for the repair.yes it is below the stop peg.
Mar 11, 2011 at 3:07 PM
Avatar
CARADIODOC
  • CERTIFIED EXPERT
  • 34,306 POSTS
Voltage spike. It is no longer the common sense spring-loaded mechanical pointer. It is positioned by a computer pulsing four magnetic coils. There are three ways to reset it. The easiest is to just drive it faster than half the maximum speedometer reading. If it reads 120 mph max., drive at 65 mph. The pointer will look for the shortest way to "65", and that will be counter-clockwise.
Mar 11, 2011 at 5:25 PM