Front Hub Bearing

Hello,

Here are the hub bearing on amazon for $35.00

https://www.amazon.com/WJB-WA512167-Assembly-Reference-BR930173/dp/B00A702PU6/ref=sr_1_2?s=automotive&ie=UTF8&qid=1512341181&vehicle=2002-39-262-------------0&sr=1-2&ymm=2002%3Achrysler%3Apt+cruiser&keywords=2002+CHRYSLER+PT+CRUISER+hub

Here is a guide that will give you an idea of how to change them out

https://www.2carpros.com/articles/bearing-hub-replacement

This will show how the front is done

https://www.2carpros.com/articles/how-to-replace-a-cv-axle-bearing

Here is how it will be on your car (below)

Check out the diagrams (Below)

Please let us know what happens.

Cheers

I just call the dealership and they want $450.00 to do the job I can't believe how much I saved by using this site.! they said something about 39mm bearing? I love 2Carpros

Are you referring to the axle nut? I can't think of anything that is 39 mm on the bearing assembly. It is probably the outside diameter of the bearing.

caradiodoc

Okay thanks again CARADIODOC I will tell my people about you guys :)

Suspension problem
2002 Chrysler PT Cruiser 4 cyl Front Wheel Drive Automatic 48000 miles

Do you know anything about two differant front hub bearing sizes?

Hello
Thanks for the donation.

I believe I will need more information here to better assist you. Could you please be more specific with the question? Do you mean one side of your vehicle has a different size hub bearings??



Thanks for using 2carpros.com!

there are 2 different size bearings dealership parts department would know which one you needed from your vin number ran into this problem a few times because there are two different bearing due to two different rim sizes.

Suspension problem
2002 Chrysler PT Cruiser 4 cyl Front Wheel Drive Automatic 62,850 miles
----------------------------------------------------------------
we have it all tore down but cannot get the old hub and bearing assembly off

you may need one of these

Drive Train Axles Bearings problem
2004 Chrysler PT Cruiser 4 cyl Front Wheel Drive Automatic

As you can see, I have a 2004 PT Cruiser, I need to know if the left side hub bearing is a job I can handle or not. I've pulled and installed engines, trans, rears, done clutches, etc. The mechanic wants close to 300 for the job,money being tight like it is I'll do it myself if not too difficult.

If you have a good repair manual, and you have done all the other things you mentioned, you will be fine.