2002 CHRYSLER 300
Avatar
TRISH28
  • MEMBER
  • 2 POSTS
Car has a 3 liter v6 and cylinders 1, 3, and 4 are misfiring. Codes are p0351, p0353, and p0354. I've checked the voltage repaired the wiring to the (COP) which all now have 12 volts, but all 3 cylinders still misfire. Vehicle has a new PCM was installed before I acquired the vehicle. I've also swapped out each of the (COPs) on all 3 cylinders with other (COPs) and its still misfiring. Im out of options and scratching my head. Can anyone advise something new to try?
Mar 20, 2013 at 11:12 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
what wiring did you repair???

what about the plugs???

Roy
Mar 20, 2013 at 11:16 PM
Avatar
TRISHMILCHLING
  • MEMBER
  • 1 POST
I replaced the two splits that power the (COPs) The plugs appear to be fine but I plan to change them out. I tested at the end of the plugs.
Mar 20, 2013 at 11:21 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
how many miles on the plugs???

the codes indicate missfire in first 1000 rpm at start up. could just be bad plugs

Roy
Mar 20, 2013 at 11:29 PM
Avatar
TRISH28
  • MEMBER
  • 2 POSTS
Well I know the 351-356 codes are ignition coil primary/secondary circuit malfunction. im not sure on exact mileage but its not spark plug issues.
Mar 20, 2013 at 11:36 PM