Wheel Bearings

I need to know if your asking about the front or rear one.

Front Passenger Side

It's a hub assembley here are the direction's on how to change it.
Front Wheel Hub, Bearing, and Seal Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the brake rotor.




4. Remove the ABS sensor mounting bolt from the wheel hub and bearing.
5. Remove the ABS sensor from the wheel hub and bearing.




6. Remove the wheel hub and bearing to the steering knuckle mounting bolts.




7. Remove the wheel hub and bearing from the steering knuckle.
8. Remove the splash shield from the steering knuckle.

Installation Procedure




1. Install the splash shield to the steering knuckle. Align the splash shield to the steering knuckle threaded holes.
2. Install the wheel hub and bearing to the steering knuckle. Align the threaded holes.

Notice: Refer to Fastener Notice in Service Precautions.




3. Install the wheel hub and bearing to the steering knuckle mounting bolts. Tighten the wheel hub and bearing mounting bolts to 105 Nm (77 ft. lbs.).




4. Install the ABS sensor to the wheel hub and bearing.
5. Install the ABS sensor mounting bolt to the wheel hub and bearing. Tighten the ABS sensor to the wheel hub and bearing mounting bolt to 18 Nm (13 ft. lbs.).
6. Install the brake rotor.
7. Install the tire and wheel.
8. Lower the Vehicle.