steering issues

2002 CHEVROLET SUBURBAN
V8 • 4WD • AUTOMATIC
Avatar
CUDANOTCH67
  • MEMBER
  • 2 POSTS
can centerlink be put in upside down
if so what would the outcome be? When I back out of a parking spot the outside tire drags. No matter which direction I turn while backing. The problem started after the Idler Arm, Pitman Arm, all 4 Tie Rods were changed. So the centerlink was out of the truck. I've had the alignment checked and it's good. Drives fine except in sharp turns.
Nov 13, 2010 at 6:41 PM
Advertisement
Avatar
WRENCHTECH
  • CERTIFIED EXPERT
  • 20,761 POSTS
No, that's not really possible. It will only fit one way. You could have the wrong one though and you could also need wheel alignment after changing those parts.
Nov 13, 2010 at 6:48 PM
Avatar
CUDANOTCH67
  • MEMBER
  • 2 POSTS
It's not the wrong link. It original to the truck. Alignment has been done and redone. It's not that. It looks like the centerlink could be put in upside down but would rub. The pitman arm and idler arm can't be in upside down. So I don't know what else it could be causing the problem.
Nov 13, 2010 at 9:35 PM
Advertisement