2002 s-10

2002 CHEVROLET S-10
6 CYL • 4WD • AUTOMATIC
Avatar
DONALD
  • MEMBER
  • 5 POSTS
I guess its automatic. the heater will not blow on the floor and defrost. it blows out the front. when you turn the **** it stays the same. What do you think it is?
Dec 14, 2010 at 7:08 PM
Advertisement
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
Do cotrols look like diagram if yes the servo fro I/P vents in op or vacuum problem see diagram
Images (Click to enlarge)
Attached Media
Attached Media
Dec 14, 2010 at 7:18 PM
Avatar
DONALD
  • MEMBER
  • 5 POSTS
yes thats the diagram. Its got to be the vaccumm .. What do I do? Could it be a valve or something.. its like its stuck in one position..
Dec 14, 2010 at 8:07 PM
Advertisement
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
The slave mode actuator see if it is getting vacuum believe above gas pedal. if not vacuum then master select switch faulty
Dec 14, 2010 at 8:16 PM
Avatar
DONALD
  • MEMBER
  • 5 POSTS
the vacuum above gas pedal aint sucking . there aint no sucking out of none of the lines. Where is the master select switch faulty?
Dec 14, 2010 at 8:23 PM
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
Back side of HVAC panel remove from dash see if vacuum is present. you will see all the lines going to switch
Dec 14, 2010 at 8:26 PM
Avatar
DONALD
  • MEMBER
  • 5 POSTS
where is the hvac panel located? I dont see anything..
Dec 14, 2010 at 8:59 PM
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
The panel in diagram with the ****s
Dec 14, 2010 at 9:26 PM
Avatar
DONALD
  • MEMBER
  • 5 POSTS
ok he found it. It was a hose off. thank you very much for answering my questions and being so patient. I know we have been a pain in the butt. thank you
Dec 14, 2010 at 9:43 PM