HEADLAMP BULB
CAUTION: HALOGEN BULBS CONTAIN A GAS UNDER PRESSURE. HANDLING A BULB IMPROPERLY COULD CAUSE IT TO SHATTER INTO FLYING GLASS FRAGMENTS. TO HELP AVOID PERSONAL INJURY:
* TURN OFF THE HEADLAMP SWITCH AND ALLOW THE BULB TO COOL BEFORE HANGING BULBS. LEAVE THE HEADLAMP SWITCH OFF UNTIL THE BULB CHANGE IS COMPLETE.
* ALWAYS WEAR EYE PROTECTION WHEN CHANGING A HALOGEN BULB.
* HANDLE THE BULB ONLY BY ITS BASE. AVOID TOUCHING THE GLASS.
* PLACE THE USED BULB IN THE NEW BULB'S CARTON AND DISPOSE OF IT PROPERLY. KEEP HALOGEN BULBS OUT OF THE REACH OF CHILDREN .
Removal
1. Disconnect headlamp bulb sockets from headlamp lens by rotating socket 1/4 turn. Pull socket rearward until bulb clears housing and lift up for access to bulb.
2. Remove headlamp bulb from headlamp harness
Installation
1 Without touching the glass, connect headlamp bulb to harness.
2. Insert bulb into headlamp housing and rotate 1/4 turn to lock. (Assembly must be correctly positioned to insert and lock.)
Mar 28, 2011 at 7:37 PM
