we replaced the blower motor relay connector, it melt.... need to know which wires go where?

2001 PONTIAC BONNEVILLE
150,000 MILES
Avatar
BULLDOG89EJT
  • MEMBER
  • 5 POSTS
we replaced the connector because it melted, the fan runs, but no air seems to be coming out of the vents, I think we have some wires crossed? we have a big Black, Purple and a small brown .... would like to know if I have them hooked up right.... looking at the back of the plug as it is plugged into the blower motor R- sm Brown, M- Big Black, L- big Purple... Thank you
Jul 9, 2012 at 11:05 PM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Do you have a manual or auto climate control?
Jul 9, 2012 at 11:26 PM
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
You must be talking about the blower motor control module instead of the blower relay-See below

Image (Click to enlarge)
Attached Media
Jul 9, 2012 at 11:28 PM
Advertisement
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
Didn't see the stop sign-Sorry
Jul 9, 2012 at 11:29 PM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Its alright rastamaz i was waiting to hear if it had auto climate control because the wire diagrams for each one would probably be different.
Jul 9, 2012 at 11:36 PM
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
Yes, been in there both auto and manual-I was gonna ask the Q you have but you flipped me-Lets see what we have on the comeback-I've looked for the relay not listed of having it, instead the BCM is popping up that powers/controls the blower motor
Jul 9, 2012 at 11:55 PM
Avatar
CJ MEDEVAC
  • CERTIFIED EXPERT
  • 11,004 POSTS
saturntech9

I WAS LOOKIN' FOR A DIAGRAM TOO!

INTERNET EXPLORER WAS NOT COOPERATING

I'VE BEEN TRYIN' TO STAY AWAY FROM "YOUR BABIES" (THIS ONE SEEMED TO BE FAIR GAME WHEN I STARTED SEARCHIN'.........I'VE BEEN OVERWHELMED WITH MINE LATELY!......DAT MAKES ME REAL HAPPY!!!

THE MEDIC
Jul 10, 2012 at 12:02 AM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
There talking about the blower control module thats what there using for a relay inside of it.
Jul 10, 2012 at 12:10 AM
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
Bulldog, What do you have for us at this time-Did you view the pic I've furnished-let us know what's happening
Jul 10, 2012 at 2:34 AM
Avatar
BULLDOG89EJT
  • MEMBER
  • 5 POSTS
it is a manual climate control, the connector plugs into the blower motor...
Jul 10, 2012 at 11:36 AM
Avatar
BULLDOG89EJT
  • MEMBER
  • 5 POSTS
the fan seems to be running backwards
Jul 10, 2012 at 11:44 AM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
The wire diagram that rastamaz post has the correct color wires going to the corrector letter terminals use that to wire the motor correctly.
Jul 10, 2012 at 8:11 PM
Avatar
BULLDOG89EJT
  • MEMBER
  • 5 POSTS
I think it is runnning backwards.... if I switch the sm Brown and Purple wire will that reverse the direction? Whaat else could cause the air flow to be slow it started when we put in the new connector thanks for your help
Jul 11, 2012 at 3:48 AM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
So did you change the connector to the blower motor itself?Also did you get a ac delco connector?You should have just matched the wires from the old connector to the new connector.Is there letters on the new connector to mark the terminal position?
Jul 11, 2012 at 4:30 AM
Avatar
BULLDOG89EJT
  • MEMBER
  • 5 POSTS
my son got it at o riellys, didn't chane the motor connector,,old connector was melted no way to see any markings...my son thinks he had it right
Jul 11, 2012 at 4:38 AM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Look at the blower motor connector and see connector housings terminal slots are label A B C?Also i hope you replaced the blower motor?If the connector to the blower motor melted like that the motor is bad.
Jul 11, 2012 at 6:33 AM