CAR JUST REFUSE TO START AFTER REPLACING CKP SENSOR TO CLEAR P0335 FAULT CODE

2001 MAZDA MILLENIA
120,000 MILES
Avatar
ASHADEOLANIYIPAUL
  • MEMBER
  • 3 POSTS
Dear,

My Name is Paul from Nigeria, i have a 2001 Mazda Millenia that has refuse to start even after replacing the CKP sensor as directed by the fault code (P0335).

Please how do you test the sensor to know if its good?

Your advice would be appreciated.

Thanks
Sep 3, 2012 at 5:43 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
a code never identifies a bad part, just a failed system.

start with basics. compression, fuel pressure and spark. one of them is missing, let us know which one

Roy
Sep 3, 2012 at 5:45 PM
Avatar
ASHADEOLANIYIPAUL
  • MEMBER
  • 3 POSTS
Thanks for the propmt reponse.

There was no spark, that was why we though the problem was from the CKP.

Awaiting you further support.

Thanks
Sep 4, 2012 at 6:05 AM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
do you have a scan tool to monitor the crank sensor??

Roy
Sep 4, 2012 at 11:52 AM
Avatar
ASHADEOLANIYIPAUL
  • MEMBER
  • 3 POSTS
Which equipment do i need to do that?

The scanner use so far detected this code "P0335" and i have replaced couple of the crank sensor from the Junk yard.
Sep 4, 2012 at 12:44 PM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
you need more diag information for the 335. you may need a shop to help you with this if you do not have a real scan tool, not a code reader.

Roy
Sep 4, 2012 at 12:56 PM
Avatar
OLANIYIASHADE
  • MEMBER
  • 1 POST
Appreciate this support.

My mechanic just told me there is power to the ignition coil but nothing is coming our of it. thus nothing is going to the Spark plug cables.

He has replaced the the ECM buts still the same result.


Please advice
Sep 4, 2012 at 3:22 PM
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
if there is no power coming out, then i would suspect a coil first.

Roy
Sep 4, 2012 at 6:42 PM