When starting car in morning motor starts revs to 1200 RPM then slows to 800 RPM and 15-20 seconds then restart. Car runs fine.
After above occurs, sometimes when driving above 1200 RPM, CEL flashes when I reduce RPM, CEL comes on solid, then when I accerlate it starts flashing again. Pull over, shut engine off, wait 20-30 seconds, start engine everything is ok. Had codes run, they indicate misfire and O2 sensors bad. Will the O2 sensor cause there problems?
After above occurs, sometimes when driving above 1200 RPM, CEL flashes when I reduce RPM, CEL comes on solid, then when I accerlate it starts flashing again. Pull over, shut engine off, wait 20-30 seconds, start engine everything is ok. Had codes run, they indicate misfire and O2 sensors bad. Will the O2 sensor cause there problems?
Oct 7, 2011 at 9:21 PM