Do I have possible IAC valve problem?

2001 HYUNDAI ELANTRA
120,000 MILES
Avatar
TEX
  • MEMBER
  • 6 POSTS
Engine revving high. When I disconnect the IAC valve, engine stops idling high but it is still rough. When I put the IAC back, it revs up high again. Already checked for vacuum leaks and didn't find any. How do I bench test the IAC valve? Could this be the problem?

Thanks.
Jun 21, 2012 at 10:48 PM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Try cleaning the iac valve and the port it goes in with some carb spray.Also do you have any codes did you check for them before unplugging the iac?
Jun 21, 2012 at 11:00 PM
Avatar
TEX
  • MEMBER
  • 6 POSTS
Yes. It wasn't sticking, but I cleaned it anyways. I had 1 TPS code - P0121. I also checked the value and everything is in spec on TPS. How would I check the values between the terminals on the IAC?
Jun 21, 2012 at 11:14 PM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Did you remove the iac when you cleaned it?Also if your getting a tps code we need to follow the trouble tree for it.Does the tps code come right back after clearing it?
Jun 22, 2012 at 4:16 AM