installation

2001 HYUNDAI ELANTRA
130,000 MILES • 4 CYL • 2WD • AUTOMATIC
Avatar
BIGGMIKE
  • MEMBER
  • 58 POSTS
im installing the cylinder head to a 2001 hyundai elantra and i have the order to tightin the bolts but what is the torque that i have to stop at..
May 28, 2011 at 8:36 PM
Advertisement
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
Step 1 18 ft.lbs.
Step 2 additional 60 degs.
Step 3 additional 60 degs
May 28, 2011 at 8:43 PM
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
(1)Tighten in sequence with engine cold.
Image (Click to enlarge)
Attached Media
May 28, 2011 at 8:48 PM
Advertisement
Avatar
BIGGMIKE
  • MEMBER
  • 58 POSTS
i do 18 ft.lbs then 60?
May 28, 2011 at 9:19 PM
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
Doc were bouncing heads going somewhere? lol-didn't see you in there-sorry

When you're done with the 2nd 60deg angle-stop!
May 28, 2011 at 9:32 PM
Avatar
BIGGMIKE
  • MEMBER
  • 58 POSTS
im having trouble installing my cam shaft can you please tell me how i can do it..thanks
May 29, 2011 at 4:38 PM
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
What kind of trouble see diagram it may help
Image (Click to enlarge)
Attached Media
May 30, 2011 at 5:55 PM
Avatar
BIGGMIKE
  • MEMBER
  • 58 POSTS
when i try to put the cam in it wont go in
the one side is in but the other side dont go all the way in
May 30, 2011 at 7:53 PM
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
Install both cams at same time. place chain as in diagram. Cam csp with "L" are intake with "R" exhaust
Image (Click to enlarge)
Attached Media
May 30, 2011 at 8:09 PM