2001 elentra engine rev upto 3000rpm

2001 HYUNDAI ELANTRA
4 CYL • 2WD • AUTOMATIC
Avatar
NABEEL_IQBAL86
  • MEMBER
  • 2 POSTS
2001 hyundai elentra rpm doesnt rev above 3000 rpm. Error codes:
P0335 crankshaft position sens mal
P1372 segment time incorrect
P0340 camshaft posi.sensor mal
P0123 throttle position sens-high input
Mar 28, 2011 at 2:06 PM
Advertisement
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
Was any repairs carried out prior to this occurring?
Mar 29, 2011 at 3:09 PM
Avatar
NABEEL_IQBAL86
  • MEMBER
  • 2 POSTS
yes, the engine was replaced, refurbrished engine was installed.
Mar 30, 2011 at 6:41 AM
Advertisement
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
Recheck the wire harnesses and connections for the cam and crank sensors.

Symptoms indicates the timing belt is most likely out of sync between the camshafts and crankshafts. Check the timing belt markings and ensure they are correct.

Mar 30, 2011 at 9:07 PM
Avatar
PLATINUMHYUNDAITECH
  • MEMBER
  • 29 POSTS
Either the timing belt is off time. Or the cam chain wich drives the second cam was not lined up properly.
Apr 6, 2011 at 11:53 PM