bleeding car brakes

If it has an ABS unit-you bleed the master and then the ABS then the wheels-You might need a scantool for the ABS unit

gravity bleed the system.remove the cap on the master cylinder.start in the r/r open the bleeder.just let it drip youll see bubbles when you see constant dripping tighten the bleeder. same with the others l/r then r/f then l/f. make sure the master cylinder stays full.see ya

Here is a helpful guide on how to bleed the brakes:

https://www.2carpros.com/articles/how-to-bleed-or-flush-a-car-brake-system

I have attached the vehicle specific brake bleeding round the meta hop.

Please let me know of any questions.
Thank you.