2001 FORD EXPLORER
120 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
I have replaced the fuel pump, fuel line, jets and fuel rail. I've checked the fuel doamper regulator. I've replaced the crankshaft sensor.(I'm wondering if I did it right. Don't know if it was supposed to b on tdc or not. ). I replaced the plugs and changed the oil because it was full of gas. I had an alarm system (Clifford) I at seemed to b a problem getting it to start. The key will not turn it over . I jump the sylinoid, but it only acts like its gonna start. New wires new coil etc.. what is my problem
Mar 11, 2013 at 11:29 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
If there is an aftermarket alarm system, I would remove it. Chances are it is causing problems. As far as the no start, are you getting spark and fuel to the engine?
Mar 12, 2013 at 12:44 AM