2001 DODGE DURANGO
100,000 MILES
Avatar
DRDUECE
  • MEMBER
  • 3 POSTS
I had a main 30 amp fuse in distribution box blow which cause the turn signals and flashers to stop working. I replaced the 63.00 flasher and the 30amp fuse and now the turn signals seem to be working but blinking a little faster both sides and also the brake lights are staying on?? When I pull the fuse the brake lights go out.so they are apparently tied into that same fuse. HELP???
Feb 13, 2013 at 12:38 AM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
If the flashers are working, I'm sure they are fine. As far as the brake light, check the switch at the top of the brake pedal. See if it is loose or out of adjustment.
Feb 13, 2013 at 12:39 AM
Avatar
DRDUECE
  • MEMBER
  • 3 POSTS
not loose or out of adjustment. This just happened when I replaced the flasher and 30amp fuse. Yesterday the fuse blew for the second time prior to me changing the flasher. I didn't even know they were on until someone told me.
Feb 13, 2013 at 12:58 AM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Something may have damaged the switch. I would check it.
Feb 13, 2013 at 12:59 AM
Avatar
DRDUECE
  • MEMBER
  • 3 POSTS
OK will do. like it could be shorting out or something?
Feb 13, 2013 at 1:11 AM
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Yes or something may have melted down inside causing it to be on all the time.
Feb 13, 2013 at 1:52 AM