how do I replace interior reading lights and control button lights

2001 CHEVROLET VENTURE
94,000 MILES
Avatar
JOSEPHAMATUCCI
  • MEMBER
  • 1 POST
The overhead reading lights for the middle row no longer work.
The overhead reading lights for the driver and passenger no longer work and it is definitely not the bulbs because the switch built into the lenses have lost their spring and just flop around.
Many of the button lights on the central control console are burned out.
Oct 9, 2012 at 1:43 AM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Have you checked the fuses yet?Do you have a multimeter to do some testing?
Oct 9, 2012 at 2:17 AM
Avatar
FREEMBA
  • CERTIFIED EXPERT
  • 1,152 POSTS
Take the push type light switches down to the point where you can get to the wires to check them for power. If power is there, then you'll have to replace the switches, since they are broken. From there you can further diagnose the problem if needed. (it may just happen to fix the problem once the switches are replaced)
Dec 2, 2012 at 6:56 PM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Also lets not forget there is a ground to the circuit and i would check for power and ground to the light fixture.Sounds.like a switch issue though from the lack of spring in the switch.
Dec 2, 2012 at 10:54 PM