2001 BMW 740
143,301 MILES
Avatar
BROD1893
  • MEMBER
  • 2 POSTS
When i floor the car wide open check engine light flashes i seems like loop status most of the time goes open never returns closed till car is shut off has and then has code p1345. Car operating temp 217, o2 sensors read when goes open loop otherwise fluctuates above and below. 450mv. Car has 150 compression on eight cyls. Smoke test shows no vacuum leaks. Has eight new plugs. New fuel filter. F. Inj. Serv. was done. Car also seems to have a rythmic idle problem while driving. Any clue?
Apr 6, 2013 at 12:47 AM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
flow chart

Roy
Apr 6, 2013 at 12:57 AM
Avatar
BROD1893
  • MEMBER
  • 2 POSTS
Cant read flow chart on my tablet will have to go to bigger computer ?will keep you posted ,thanks.
Apr 6, 2013 at 1:00 AM
Advertisement
Avatar
DOCHAGERTY
  • CERTIFIED EXPERT
  • 9,603 POSTS
I would look at the live data to start with, additive and multiplicative numbers, KG/air/minute, injector pulse width, and any relevant fault codes that wont erase. A flashing CEL can indicate converter damage and will send it into limp home mode.
Apr 9, 2013 at 7:26 AM