I just need to remove the lock cylinder to replace it, Im wondering if I need a special toll to extract it?
Images (Click to enlarge)
Nov 15, 2011 at 9:38 PM
how to remove lock cylinder in audi a4 2001?
2001 AUDI A4
VIENDOESTRELLAS
- MEMBER
- 2 POSTS
- FOLLOW
Advertisement
There should be a release pin in the column.
Nov 15, 2011 at 9:39 PM
do you have any idea where exactly or how I should do it? Im not a mechanic. thank You
Nov 15, 2011 at 10:25 PM
Advertisement
STEERING COLUMNS -2001 Audi A4
Page 1 of 1
Removal & Installation (S4, 2001 A4)
Remove steering column. See appropriate procedure under STEERING COLUMN
Steering column must be clamped in a vice for drilling or chiseling out shear bolts. Mounting bracket of steering column will be damaged if work is performed with steering column installed in
vehicle. Drill or chisel out sheer bolt. See Fig. 4 .
3. Install lock cylinder using NEW shear bolts. Tighten shear bolt to about 15 ft. lbs. (20 N.m). Head of shear bolt should shear off at this point. To finish installation, reverse remaining removal
procedure.
1. 2.
.
Fig. 4: Removing & Installing Lock Cylinder Courtesy of AUDI OF AMERICA, INC.
© 2008 Mitchell Repair Information Co., LLC.
Page 1 of 1
Removal & Installation (S4, 2001 A4)
Remove steering column. See appropriate procedure under STEERING COLUMN
Steering column must be clamped in a vice for drilling or chiseling out shear bolts. Mounting bracket of steering column will be damaged if work is performed with steering column installed in
vehicle. Drill or chisel out sheer bolt. See Fig. 4 .
3. Install lock cylinder using NEW shear bolts. Tighten shear bolt to about 15 ft. lbs. (20 N.m). Head of shear bolt should shear off at this point. To finish installation, reverse remaining removal
procedure.
1. 2.
.
Fig. 4: Removing & Installing Lock Cylinder Courtesy of AUDI OF AMERICA, INC.
© 2008 Mitchell Repair Information Co., LLC.
Image (Click to enlarge)
Dec 31, 2011 at 8:19 AM