2000 Volkswagen Golf 2 second cut outs when drivin

2000 VOLKSWAGEN GOLF
123,000 MILES • 1.4L • 4 CYL • FWD • MANUAL
Avatar
CHRISMK4GOLF
  • MEMBER
  • 14 POSTS
When driven at any speed the car will randomly cut out for two seconds all the needles on the gauges in the car will drop as soon as this happen,s but straight away shoot back up and the car will then go perfectly this will happen randomly sometimes every ten mins or a half hour the cars been doin this the last week. And when this happens no lights on the dash come on. Plse please please any help would really be appreciated I really relie on this car and fear I'm gonna get stranded some where when driving
Dec 30, 2013 at 6:29 PM
Advertisement
Avatar
MHPAUTOS
  • CERTIFIED EXPERT
  • 31,937 POSTS
Sounds like a bad electrical connection, and the car vibration is causing a make or brake in the current flow, you may be able to do a simple test to find it, with the engine running, carefully wiggle all wires and terminals, if there is a problem with a connection the engine may falter.
Jan 3, 2014 at 3:19 PM
Avatar
CHRISMK4GOLF
  • MEMBER
  • 14 POSTS
Thanks so much for your
reply:-) .. Unfortunately the car eventually stoped. Its wasnt electrical. When it finaly cut out it would not restart by key or push I tough it was something with the starter at first by rocking the car back and forward we eventually got the car started by pushing it but when it started there was a really bad knocking/ratlle comin from the bottom of the engine and was really down on power if I let the engine go under 2000rpm the engine would jus cut. My mechanic said that it was bearings in the big-end that were failing for a while end eventually did. But 4 minutes jus before the car finally stoped it reved out fully on its own then was perfect for couple of mins until it died. Id like to know your opinion before I get a new engine know that you know more about the problem kind regards and many tanks Chris o neill

Keep up the good work ;-) :-)
Jan 8, 2014 at 2:00 PM
Advertisement
Avatar
MHPAUTOS
  • CERTIFIED EXPERT
  • 31,937 POSTS
You will have to drop the sump and check the bearings, but the description you have given it does sound terminal. Probably it has spun a bearing, when an engine does this, it will knock and falter as the 2 bearing 1/2's spin together then they are pounded and the engine revs hard until the engine locks up ,if this is the case, look for a second hand engine as a cheap option.
Jan 9, 2014 at 8:51 PM
Avatar
CHRISMK4GOLF
  • MEMBER
  • 14 POSTS
Tanks for your replys and advice. Would you know anything about engines codes I was told I may get an engine with matching codes we're are these codes and which part of the code will have to match as I'm hoping to put the engine in myself. I know I'm gettin technical but it's worth a try any advice would b appreciated. If you don't know anything about this subject not to worry I really appreciate all advice and help you guys gave me. And jus to say what an awesome website you have goin and what you guys do for us all keep up the good work many tanks and wishing you the best of luck Chris o Neill
Jan 11, 2014 at 12:52 PM
Avatar
MHPAUTOS
  • CERTIFIED EXPERT
  • 31,937 POSTS
I have no info on a 2000 Golf with a 1,4 engine, are you sure this is correct? What country are you in?
Jan 12, 2014 at 3:54 AM
Avatar
CHRISMK4GOLF
  • MEMBER
  • 14 POSTS
republic of ireland its the mark 4 1.4 16v engine year 2000
Jan 14, 2014 at 11:29 AM
Avatar
MHPAUTOS
  • CERTIFIED EXPERT
  • 31,937 POSTS
the data base I have to work with is for US cars and your version is not mentioned, normally the first digits of the engine no will give you the engine code,
Jan 14, 2014 at 3:35 PM
Avatar
CHRISMK4GOLF
  • MEMBER
  • 14 POSTS
I found it appreciate that and its awh is the engine code
Jan 15, 2014 at 10:28 AM
Avatar
MHPAUTOS
  • CERTIFIED EXPERT
  • 31,937 POSTS
OK, good luck with this.
Jan 15, 2014 at 2:24 PM