Brake and reverse lights are not working

2000 ROVER 25
70,000 MILES
Avatar
MICHAELROVER25
  • MEMBER
  • 1 POST
i've changed bulbs and worked out the fuse keeps on blowing after being replaced. What can i do? I've also changed the relay switch at the back but can't seem to pull out the black relay under the steering wheel, i really need to find out because i don't want to take it to a garage if the problem can be resolved easily? please help.
Feb 25, 2012 at 7:10 PM
Advertisement
Avatar
SQM
  • CERTIFIED EXPERT
  • 6,383 POSTS
Hello,

There might be short in the circuit and that is why the fuses blow when plugged in.

It will be a good idea to check the brake light switch. The brake light switch is located under the brake pedal. When the brake gets depressed, the switch gets pressed, and the brake lights come on.
Shorted out brake light switch will prevent the lights from working.

Here is a helpful guide on how to check wiring:

https://www.2carpros.com/articles/how-to-check-wiring

Since the Rover was not sold in the US, we are unable to provide a diagram or the wiring schematics.

Please let me know if you have any questions.
Thank you.
Image (Click to enlarge)
Attached Media
Feb 6, 2022 at 10:25 PM