door locks, power windows and courtesy lights do not work

2000 PONTIAC BONNEVILLE
250,000 MILES • 3.8L • V6 • 2WD • AUTOMATIC
Avatar
RBD2000
  • MEMBER
  • 5 POSTS
My car's door locks, power windows and courtesy lights don't work. The buttons on the door or key fob will not work. The radio stays on after you open the door also. Power mirrors do work. Checked and cleaned ground bus at the drivers kick plate. Checked wires in the door jam. All okay. Redid connection at tan and white wires under the drivers seat. What am i missing? Checked all fuses too.
Jan 24, 2019 at 2:10 PM
Advertisement
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
Hello,

Nine times out of ten i its the DDM (drivers door module) located behind the door panel on the drivers side. I would try a used to save money. Here is a guide to help walk you through taking the door panel off with diagrams below for your car:

https://www.2carpros.com/articles/door-panel-removal

Check out the diagrams (below). Please let us know what happens.

Jan 26, 2019 at 11:50 AM
Avatar
RBD2000
  • MEMBER
  • 5 POSTS
I already changed out the module with a used one from eBay. Exact same numbered one. Still nothing.
Jan 26, 2019 at 2:02 PM
Advertisement
Avatar
RBD2000
  • MEMBER
  • 5 POSTS
I was told it is the BCM.
Jan 26, 2019 at 2:04 PM
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
There is no BCM in these circuits just more door modules. Here is a guide to help you test the connections and the door lock and window wiring diagrams so you can see how the systems work:

https://www.2carpros.com/articles/how-to-check-wiring

Check out the diagrams (below). Please let us know what happens. It sounds like one of the other modules is out, you will need to do a can scan to see which one.

can scan video

https://youtu.be/InIlnsjOVFA

Jan 28, 2019 at 12:46 PM
Avatar
RBD2000
  • MEMBER
  • 5 POSTS
Got it fixed. A friend of mine at Extreme Automotive in Junction City, Kansas pulled the whole wiring harness out of the drivers door and found the purple data wire broken off at the pin in the connection at the kick panel. Also two other wires were broken between jam that I couldn't see. Hooked everything back up to the original door module. Everything worked perfect. Oh thanks for the images Ken. I copied them and printed them off for future references. So happy. The GM dealer here is a goat rope.
Feb 1, 2019 at 4:09 PM
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
lol, glad you could get it fixed, that kind of problem can be tough. Please use 2CarPros anytime we are here to help.
Feb 2, 2019 at 1:20 PM
Avatar
RBD2000
  • MEMBER
  • 5 POSTS
Will do. Thanks again.
Feb 2, 2019 at 1:25 PM