2000 PLYMOUTH BREEZE
220,000 MILES
Avatar
BLINK182TG
  • MEMBER
  • 2 POSTS
When I come to a stop sign or stop light and have my foot on the brake my car sometimes will idle rough for just a second. I have replaced the plugs and wires along with egr valve. now there are no codes showing active.
Dec 18, 2012 at 10:48 PM
Advertisement
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
Go to this walk thru link for more information: https://www.2carpros.com/articles/engine-misfires-or-runs-rough
Dec 19, 2012 at 12:35 AM
Avatar
BLINK182TG
  • MEMBER
  • 2 POSTS
So I finally figured out what the issue was it would miss when you put it in drive not going down the road but when at a stop if you put it in neutral it would stop it from being as bad. But there were no check engine lights on. So I was on lunch and I decited to unhook the power wire to the pruge solenoid and the check engine light came on and then I put the car in drive and put the parking break on and the car didnt miss not one time. So I put my foot on the break and took off the emergency break off and shifted it though the gears and still no miss. So I ordered the part from advanced and installed it. No miss now. I spent so much time on this I wish there was an easy button. So if anyone has this problem and there is no check engine light check that purge solenoid and all your vacuum lines I replaced 2 vacuum lines egr and plugs and fuel filter and the air filter and also cleaned the throttle body. I was about to pull my hair out. Thank you rasmataz for the link it got my mind thinking.
Dec 19, 2012 at 9:37 PM
Advertisement