How do I repair my Cruise Control.? 10 - 15 second Delay before activating

2000 NISSAN FRONTIER
82,000 MILES
Avatar
BILL JENSEN
  • MEMBER
  • 4 POSTS
When I engage my C/C button. Button lights up green and the word "Cruise" lights up green next to the odometer. (so far so good) Now when I hit "Set" (Say at 60 mph), The vehicle speed slows and just Coasts until it reaches 50 mph. Then it engages and slowly speeds up until it reaches the "Set" speed of 60 mph. What's causing this delay.?
V6, Manual, 4X4, Ext Cab.

Thanks for your help.
Nov 16, 2011 at 12:59 AM
Advertisement
Avatar
PROAUTOTECH
  • CERTIFIED EXPERT
  • 288 POSTS
i'm not sure at all yet, but i need to ask- stock tire size? and any other gremlins with the speedometer that are noticable like delayed speedo response/
Nov 16, 2011 at 1:42 AM
Avatar
BILL JENSEN
  • MEMBER
  • 4 POSTS
Yes. Stock wheels and Tires. Speedometer and RPM gauge works perdfectly. Also. Sometimes when going up a hill the c/c Never does engage. But on level roadway it always engages. although not for 10 - 15 seconds. Hit "set" button at 60 mph. then truck coasts loses speed to 50 mph then begins a slow climb back up and stays correctly engaged at 60. Often this whole process can take up to 20 seconds..

bill
Nov 16, 2011 at 2:06 AM
Advertisement
Avatar
MHPAUTOS
  • CERTIFIED EXPERT
  • 31,937 POSTS
This is a factory cruise control we are looking at?
Nov 17, 2011 at 9:36 AM
Avatar
BILL JENSEN
  • MEMBER
  • 4 POSTS
Yes. This is the original C/C. Checked fuses. Cable from Servo to throttle linkage looks fine. I was told it could be a Vacuum leak. How would I check that.?

Thanks!
Nov 20, 2011 at 7:14 PM
Avatar
BILL JENSEN
  • MEMBER
  • 4 POSTS
Is this now a Dead question.?
Dec 1, 2011 at 10:32 PM