no idle control on 2000 mitsubishi galant 2.4 after replacing battery

2000 MITSUBISHI GALANT
90,000 MILES
Avatar
HIGHWAYSTAR
  • MEMBER
  • 4 POSTS
replaced battery. now engine with not idle. runs ok but if you stop it it dies out. starts ok after that. have to keep foot on gas while braking to keep engine running. do I have to run the car 20-30 miles for the computer to relearn the IAC info. it ran just fine before the battery was disconnected. please advise.
thanks.
Mar 19, 2012 at 9:21 PM
Advertisement
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
You gonna have to keep driving it till it relearns itself
Mar 19, 2012 at 9:27 PM
Avatar
HIGHWAYSTAR
  • MEMBER
  • 4 POSTS
How much do I have to drive my car until it "relearns itself"? I just drove it at 60 mph for 25 miles and nothing changed. This is my wife's car and she can't drive with 2 feet like I did to keep it from dying out. This is not a normal way to drive. There has to be a better way.
Mar 20, 2012 at 1:32 AM
Advertisement
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
Try cleaning out the idle air control valve and see what happens

VEHICLE DRIVEABILITY COMPUTER RELEARN PROCEDURE
Manufacturer does not provide a specified computer relearn procedure for obtaining proper driveability. If vehicle battery was disconnected or Powertrain Control Module (PCM) was replaced, driving the vehicle will enable the PCM to perform a computer relearn procedure for obtaining proper driveability. Inform customer that driveability may differ from what they are accustomed to until the PCM completes the computer relearn procedure
Mar 20, 2012 at 5:33 AM