EGR valve?

2000 MITSUBISHI GALANT
167,000 MILES
Avatar
CAKINS
  • MEMBER
  • 2 POSTS
The engine light came on in my daughters car. We put it on the computer and it was the EGR solenoid. We replaced that and the EGR valve. The car would crank and run fine until it warmed up. When it gets warm, it dies and will turn over but not crank. We plugged off the vacuum on the valve and the car ran just fine for about 6 months. Now it is doing the same thing. Is there anything else we can try?
Jan 7, 2013 at 3:23 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
scan for codes and check fule presure first. it may be something entirely different
Jan 7, 2013 at 3:28 PM
Avatar
CAKINS
  • MEMBER
  • 2 POSTS
It is not showing any codes. The fuel pressure is fine.
Jan 7, 2013 at 3:57 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
fuel pressure must be 38 psi minimum wvacuum and 47-50 wthout. if no codes check cam and crank sensors for resistance if fp is up to specs.
Jan 7, 2013 at 5:53 PM
Avatar
GERALDINE RUSSELL
  • MEMBER
  • 5 POSTS
i read something about the egr solenoid had to be purged. whats that, should we do that. if so how?gerri again
Feb 16, 2019 at 6:30 AM
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
No that does not need to be done what code are you having? This guide will help

https://www.2carpros.com/articles/checking-a-service-engine-soon-or-check-engine-light-on-or-flashing

Please run down this guide and report back.
Feb 18, 2019 at 12:27 PM
Avatar
GERALDINE RUSSELL
  • MEMBER
  • 5 POSTS
the car cranked today very 1st try., temp outside almost freezing. before we replaced the egr valve, same thing cold weather it starts would cold have any effect on the compression?
Feb 21, 2019 at 7:21 PM
Avatar
STRAILER
  • CERTIFIED EXPERT
  • 53,854 POSTS
Yes the engine can be frozen do you have a block heater? The engine cranks but does not run?
Feb 22, 2019 at 10:34 AM