Check oil level light on.

2000 GMC C2500
V8 • 4WD • AUTOMATIC
Avatar
CRHAMMON
  • MEMBER
  • 1 POST
How do I cycle the engine on a 2000 gmc 2500? I have checked the oil levels they are good. Manual says to cycle the engine to remove the light on the message centre.
Dec 12, 2010 at 12:05 AM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
if you are talking about change oil soon, then turn key on without starting the truck. hit the gas pedal to the floor 3 times within 5 seconds. the light should flash. if it's check oil level then have it checked for a grounded wire or bad sending unit in the pan
Dec 12, 2010 at 12:37 AM