I have a 2000 Chevrolet Impala LS and i am curious to know if it is easy to replace the rear stabilizer Links??
Jul 12, 2012 at 11:52 PM
Advertisement
SATURNTECH9
CERTIFIED EXPERT
30,869 POSTS
Yeah there easy you just have to hold the shaft with the wrench while loosening or tightening the nuts.
Jul 13, 2012 at 12:02 AM
LOVEITDOWNSOUTH
MEMBER
11 POSTS
I dont understand do you have a picture or something
Jul 13, 2012 at 12:30 AM
Advertisement
SATURNTECH9
CERTIFIED EXPERT
30,869 POSTS
As you can see in the pic there is a nut on the threaded shaft you hold that with a wrench when removing the nut.To remove the old one and install the new one.Really easy.
Image (Click to enlarge)
Jul 13, 2012 at 12:37 AM
LOVEITDOWNSOUTH
MEMBER
11 POSTS
Ok seems fairly easy.. I am assuming there is 2 of them there need to be replaced right and they are in the rear of the car
Jul 13, 2012 at 12:40 AM
SATURNTECH9
CERTIFIED EXPERT
30,869 POSTS
You did say rear sway bar links so that would be in the rear.Also there is two one on the left and one on the right.If there both bad you would replace both.If only one is bad you can just replace the bad side.But there not real expensive so i would just replace both of them.
Jul 13, 2012 at 12:47 AM
LOVEITDOWNSOUTH
MEMBER
11 POSTS
Well the mechanic told me that they have play in them.
Jul 13, 2012 at 1:01 AM
SATURNTECH9
CERTIFIED EXPERT
30,869 POSTS
That sounds about right they get play in them or freeze up from salt and snow areas.I would just replace both of them then.
Jul 13, 2012 at 1:20 AM
LOVEITDOWNSOUTH
MEMBER
11 POSTS
So on average how long would it take to replace the 2 of them?? If a backyard mechanic does them.