help bmw feels like its gonna kill

2000 BMW 528
131,000 MILES • 6 CYL • 2WD • AUTOMATIC
Avatar
JAMIENIYA
  • MEMBER
  • 3 POSTS
why is my 2000 bmw 528i taking so long to change from first gear to second gear when im at a light an i press the gas
Feb 9, 2011 at 10:19 PM
Advertisement
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
A bad needed tune-up will affect the operation of the transmission. Check the transmission fluid condition and level.
Feb 10, 2011 at 12:14 AM
Avatar
JAMIENIYA
  • MEMBER
  • 3 POSTS
ok not a problem i can do that but it is under the car so the only way to check it is if i get under the car
Feb 10, 2011 at 1:13 AM
Advertisement
Avatar
DOCHAGERTY
  • CERTIFIED EXPERT
  • 9,603 POSTS
There is also a bulletin regarding this problem, I will research it and get back to you straightaway.
Feb 10, 2011 at 1:51 AM
Avatar
JAMIENIYA
  • MEMBER
  • 3 POSTS
ok thanks
Feb 10, 2011 at 6:31 AM
Avatar
DOCHAGERTY
  • CERTIFIED EXPERT
  • 9,603 POSTS


Group 24
Automatic Transmissions

Bulletin Number
24 07 00

Woodcliff Lake, NJ
November 2000
Service Engineering

This bulletin is also issued in Group 12 (Engine Electrical), S.I. 12 03 00, the contents of which are identical.

SUBJECT
E39 THMR1 Harsh 1-2 and 2-3 Upshift with Light Throttle Application

MODEL
E39 with M52TU produced 9/98 to 2/99

SITUATION
Customer complaint of a hard 1-2/2-3 upshift when accelerating lightly.

CAUSE
DME/ECM calibration

CORRECTION

Reprogram the DME/ECM with CD 23.0 or higher.

PROCEDURE
1. Before programming, check the DME programmed and basic control module numbers. If the numbers shown are displayed, do not program the DME. Contact the Technical Hotline for further information.

2. An automatic determination can be used to reprogram the DME/ECM in a '99 or '00 MY 528iA/iAT.

Select:

-- Programming

-- DME programming

-- Exchange control unit

-- Determine basic control unit

-- "Is faulty control unit installed in car?" ... select "Yes"

-- Enter VIN

-- Program basic control unit

-- Clear adaptation values
The numbers shown will be displayed after programming with CD23.0.

WARRANTY INFORMATION

Covered under the terms of the BMW New Vehicle Limited Warranty.

Feb 10, 2011 at 12:13 PM