rough start high idle very confused

Sounds like a bad coolant temp sensor really common for those to go bad.I would also inspect the inside of the connector if the terminals are blue or green instead of silver you will need to replace the connector also.Let me know what you find.The sensor is only like 11.Also any codes?

think i found a solution ill know for sure in the morning the wire going to the cts had a break in it after rewiring it she fired right up wouldnt have found the break unless you mentioned about the sensor thank you

You need to check the inside of the connector for being corroded also.I would just replace the sensor there cheap and fail often.I have a 1999 saturn SL2 bought in 2006 and iam on my fourth cts.Keep me posted on how things go though.

yea im going to work on it this weekend i also have small water leak in intake manifold i just discover and do you know the location on the obd2 port?

That would be really strange for that year and model to be leaking coolant from the intake.Are you sure its not the hose running from the intake to the heater core?The obd2 connector is to the left of the steering column at the edge of the impact panel you cant miss it.So is you check engine light on?

yea check engine im thinking vacuum deal and hoses look good but i got coolant on the bell housing i cant pinpoint it though

Let me know what the exact code numbers you get when you have it scanned.You could add some coolant dye and use a dye light to pin point the leak.

ok went to advance for their scanner and found some old codes and new ones heres what i got
P0113 iat. Circuit high
P0341 camshaft position sensor a range/ performance b1
P0118 ects high

i cleared all codes started car and it only gave me the p0113 so i bought a new one upon installation i discovered iat was never connected when i put the engine in so i connected it but check engine is still on idk if it just needs time to clear or what

Just go have them clear the codes and see which ones come back.The P0341 i would check the spark plugs for black carbon in the spark plug boot ends where they go on the spark plugs.Also inspect the outside of the spark plugs for black carbon or arched plugs.Meaning channels or lines burned into the outside of the plugs from spark traveling down the sides of the plug.

plugs wires coils are all new anything else it could be

It could just be a old code that set before you changed all that.Clear the codes and see which ones come back if any.

all codes clear none returned also fixed leak with a gasket sealer car is running like a champ i hope it will last through the winter the charger doesnt like the snow lol thnaks for all your help

your welcome thats what were here for.