Welding Precautions (Electrical)

1999 PONTIAC MONTANA
143 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
DAVIDEYE
  • MEMBER
  • 2 POSTS
Hi, What electrical precautions do I need to take regarding arc welding on my 1999 Pontiac Montana Van besides disconnecting battery? I don't want to damage any electronic computers or modules, ie: main computer, ABS brake comp., cruise control, ignition module, etc. Thank you, David.
Dec 18, 2010 at 10:39 PM
Advertisement
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
Arc welding NEED to reomve all electronic modules. MIG or TIG you can leave hooked up
Dec 18, 2010 at 10:46 PM
Avatar
DAVIDEYE
  • MEMBER
  • 2 POSTS
Thank you Docfixit for the reply. I have to weld a crack in the sway bar and I don't want to remove it if I don't have to...although it is probably "isolated" with rubber bushings but I haven't looked closely yet. Rather than take a chance, I will probably remove it before welding the crack. I will NOT remove all the electronic components...I'll opt to remove the sway bar instead.
Dec 18, 2010 at 11:26 PM
Advertisement
Avatar
DOCFIXIT
  • CERTIFIED EXPERT
  • 18,828 POSTS
Good decision have had to replace lots electronic components after cars come out of body shop
Dec 19, 2010 at 7:39 PM