My window on my passenger door wont roll back up.

Check to see if there is power to the motor. If there is, check the motor. If no power, check the switch for power.

When I press it down like to roll it down there is a click noise, but it just will not come back up. It is cold because it is winter.

Have you checked to see of there is power to the motor when you try to wind it up?

Well it just did it like one hour ago, when I press the button the motor does not even make a sound like the other window does.

The window is all the way down in the door so am I going to have to take the panel off to assist it back up.

You can use a test light to check and see if you have a bad switch which would be easier then pulling the panel if its the switch. Also, those motors do not have pellets they have a thermal breaker to shut the motor off when fully up and fully down.

Can anyone get me a manual or a tell me how to take the door panel off on this particular model?

So you tested the window switch to rule that out?Just trying to save you the hassle of pulling the door panel for nothing.

Yes, I did and it was not the switch. So can some one just tell me how?

Here you go.