water pump replacement, pontiac

1999 PONTIAC FIREBIRD
FWD • MANUAL
Avatar
MICHAEL.OLSON93
  • MEMBER
  • 1 POST
I've got a 1999 pontiac firebird 3.8L V6 with a bad water pump. I have acquired the replacement parts including a new water pump and a new thermostat, I have done this repair before, however I have never done it to my car or a car like mine. Since this is a daily driver of mine I would like to get step by step instructions of how the procedure should be done according to my specific vehicle.
Jul 29, 2011 at 10:19 PM
Advertisement
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
Removal & Installation ("C" & "H" Bodies - VIN "K")
Tips Click a link to view tip
Tech1Tip: R & R water pump


Drain cooling system. Loosen water pump pulley bolts. Remove drive belt. Remove water pump pulley bolts and pulley. Remove water pump and gasket. To install, reverse removal procedure using NEW gasket. Fill and bleed cooling system. See COOLING SYSTEM BLEEDING.
Removal & Installation ("G" Body - VIN "K")
Drain cooling system. Remove air cleaner assembly. Remove water pump belt cover. Remove water pump drive belt. Remove by-pass hose. Remove lower radiator hose from thermostat housing.
Remove bolts from water pump cover. Remove water pump cover. Remove water pump, pump seal, and gasket from housing using Water Pump Remover (J-38816-1A). Turn tool clockwise in order to remove water pump. Remove water pump. To install, reverse removal procedure using NEW gasket. Fill and bleed cooling system. See COOLING SYSTEM BLEEDING.
Jul 29, 2011 at 10:29 PM