engine crank but want start?

1999 NISSAN MAXIMA
Avatar
JOE1953
  • MEMBER
  • 772 POSTS
fuel pump run when turn switch on and gas is getting to the fuel rail but gas is not going through the fuel injector into the cylinder, i can spray some gas into the throttle body and the engine will start.
Aug 24, 2012 at 3:01 AM
Advertisement
Avatar
MHPAUTOS
  • CERTIFIED EXPERT
  • 31,937 POSTS
check injector pulse with a noid light, if no pulse you will proberbly have a faulty cam or crank angle sensor, a scan will normally show up any fault here.
Aug 24, 2012 at 4:36 AM
Avatar
JOE1953
  • MEMBER
  • 772 POSTS
i scan the computer it have a code #1320, po325, po304
Aug 24, 2012 at 4:54 AM
Advertisement
Avatar
JOE1953
  • MEMBER
  • 772 POSTS
where are the cam and crank angle sensor located,
Aug 24, 2012 at 5:49 AM
Avatar
JOE1953
  • MEMBER
  • 772 POSTS
i check injector pulse with a noid light the light will not blink, so why the noid light don't blink.
Aug 25, 2012 at 1:36 AM