My idle is about 1500 while in park. Is that too high? If so, how do I adjust the idle?
Dec 27, 2012 at 4:17 AM
1999 MAZDA B4000
ANONYMOUS
- MEMBER
- 1 POST
- FOLLOW
Advertisement
The idle speed is controlled by the computer and cannot be adjusted.
You should remove and clean the Idle Air Control (IAC) solenoid.
While it is off (even before you clean it, use an ohmmeter to check its resistance (listed below):
Turn the ignition switch to the OFF position.
2. Disengage the wiring harness connector from the IAC valve .
3. Using an ohmmeter, measure the resistance between the terminals of the valve.
If the resistance is not 7-13 ohms, replace the IAC valve.
Let me know how it goes.
You should remove and clean the Idle Air Control (IAC) solenoid.
While it is off (even before you clean it, use an ohmmeter to check its resistance (listed below):
Turn the ignition switch to the OFF position.
2. Disengage the wiring harness connector from the IAC valve .
3. Using an ohmmeter, measure the resistance between the terminals of the valve.
If the resistance is not 7-13 ohms, replace the IAC valve.
Let me know how it goes.
Dec 27, 2012 at 4:55 AM