auto trans not working

1999 MAZDA B3000
266,000 MILES
Avatar
AFTERMATH
  • MEMBER
  • 3 POSTS
i did an engine swap 3.0 when i put it back togather auto trans don't work. worked fine before trans is 4r44e/5r44e.talked to trans shop i have had service at before,they say proubly blow the pump so i checked pump it look ok. got another trans and torque converter i installed it,an the samething nothing happens no forward or reverse nothing just like there is no trans in it! i brouht it to two other shops they just want to do a rebluid $1200/$1400
Dec 6, 2011 at 6:04 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
If it worked properly before, it should still be fine. Is the torque converter bolted to the flywheel? Is the trans fluid full?
Dec 6, 2011 at 7:37 PM
Avatar
AFTERMATH
  • MEMBER
  • 3 POSTS
yes trans worked fine fliud is good.tryed another trans and torque converter changed wiring harness and samething nothing ,could the TCM need to be reprogramed?
Dec 7, 2011 at 7:24 AM
Advertisement
Avatar
JACOBANDNICKOLAS
  • CERTIFIED EXPERT
  • 110,175 POSTS
Anything is possible. I guess that would be my next step.
Dec 7, 2011 at 5:52 PM