keyless entry remote, doors lock but no flashing front-rear lamps and horn signal

1999 LINCOLN TOWN CAR
35,000 MILES
Avatar
ZOLTAN TAHIN
  • MEMBER
  • 2 POSTS
dear carpros,
if I press the "lock" button on my Keyless Entry Remote - 4 Button w/ Trunk Release - then lock any doors properly, bat without one flashing of front-rear lamps and without one signal of horn.
Any funktions operation - lamps, horn, alarm etc.- are normally.
Whats the problem?
Thanks for Your support
regards
zoltan
Nov 14, 2011 at 12:27 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
check the battery in your remote or try another remote if you have one.
Nov 14, 2011 at 2:56 PM
Avatar
ZOLTAN TAHIN
  • MEMBER
  • 2 POSTS
Dear hmac300,
thanks for the quick response! I`ve 2x remote with battery-**** 3V, both tested with DMM: 3,01V and 3,04V
Nov 16, 2011 at 3:06 PM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
have the module checked, it may be bad. also check your ground on the left a pillar, that would be by your kick panelon lh side of car.
Nov 16, 2011 at 9:05 PM