Lexus ES 300 doesn't work? (revised)

1999 LEXUS ES 300
80,000 MILES
Avatar
STEVE AUSTIN
  • MEMBER
  • 2 POSTS
Sorry for the mix up!

My Lexus ES 300 WILL TURNOVER (crank), BUT NOT START and it has no compression in all the cylinders. The DRL (Daytime Running Lights) won't come on at all. The headgaskets were just changed (composite material) and the fuses are all good. Spark is present and fuel is present. I checked everything in the car and the only other thing that I could think of is that it's an electrical problem.

I'm all out of solutions and I need help.

Jan 2, 2012 at 9:54 AM
Advertisement
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
No compression on all cylinders-start by checking the timing belt/chain
Jan 2, 2012 at 10:07 AM
Avatar
STEVE AUSTIN
  • MEMBER
  • 2 POSTS
Changed it several times and it wasn't the problem. I disassembled and assembled the engine 5 times and I'm completely frustrated. Could it be a problem with the chip in the key? Is there a short somewhere?
Jan 2, 2012 at 11:15 AM
Advertisement
Avatar
KHLOW2008
  • CERTIFIED EXPERT
  • 41,814 POSTS
If timing belt/chain are correct, remove the spark plugs and pump 1 cc of engine oil into each cylinder. Crank the engine for a few seconds to lubricate the liners. Recheck the compression. If available, reinstall the spark plugs and retry starting.

DRL could be another problem. We will get to that once you have the engine running. DRL requires the engine to be running to work.
Jan 2, 2012 at 12:56 PM