fuel pump wiring diagram

1999 JEEP GRAND CHEROKEE
Avatar
REDNEX18
  • MEMBER
  • 9 POSTS
i just recently did the bypass thing on relay for the fuel pump because 85 terminal is not getting power so its a short some were but its hooked straight to battery and works and runs fine. now to run the fuel pump i have a switch to turn it on and off but when i shut the switch off and key it stays running and spits and sputters then finnaly shutsdown any way i can get it to just shut off with key like normal the wire i have running from the line on the fuel pump is in terminal 30 to make the pump run
Oct 3, 2012 at 11:56 PM
Advertisement
Avatar
KASEKENNY
  • CERTIFIED EXPERT
  • 18,907 POSTS
I am attaching the wiring diagram for this because the feed for the power of the relay does not come direct from the battery. If you don't have power to the B+ terminal of the relay which in this wiring diagram is D2 then you have a fuse issue.

However, if you have no power coming from the PCM on D6 then you have a PCM issue.

https://www.2carpros.com/articles/how-to-check-an-electrical-relay-and-wiring-control-circuit

You do not want to bypass this relay because the PCM needs to be able to have the ability to cut the pump off because if you are in an accident and the fuel pump keeps running then it can turn a bad situation to a fatal situation.

Please see the wiring diagrams below and let us know if you need more help figuring out why you have no power to the relay.

Thanks
Images (Click to enlarge)
Attached Media
Attached Media
Attached Media
Nov 28, 2021 at 4:26 PM