How to replace ignition switch

REPLACEMENT

1. Make sure you have the anti-theft codes for the radio and the navigation system, then write down the frequencies for the radio's preset buttons.

2. Disconnect the battery negative cable.

3. Remove the steering column covers.

4. Insert the ignition key, and turn it to "0".

5. Remove the two screws (A), and replace the electrical switch (B).

6. Install in the reverse order of removal.

7. After reconnecting the battery, enter the anti-theft codes for the radio and the navigation system, then enter the radio station presets.

8. Do the power window control unit reset procedure.

9. Confirm that all systems work properly.

© 2008 Mitchell Repair Information Co., LLC.

Thanks very much for a fast response, KHLow2008.
I give you all pts.

You're welcome.

Have a nice day.

Will this procedure work on a 2010 model Odyssey?

I don't think so if you start a new question for your car, we can provide the information you need. Please post your new question here, you must be logged in.

https://www.2carpros.com/questions/new

Cheers, Ken