what are P0702 & P0713 and where to find its locations

1999 FORD CROWN VICTORIA
Avatar
SHABOOR
  • MEMBER
  • 2 POSTS
I change my 1999 ford Victoria LX gear due to problem in the old one, now the check engine light is on and the over drive light is flashing, I check the codes and it gives me P0713 & P0720.
My question is what sensors are the codes P0702 & P0713, and where can I found it?
May 26, 2012 at 1:16 AM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
702 is not correct. 713 is an open circuit . it could be the wire harness for the valve body or exterior.

a code never identifies a failed part, just a failed system. you need a shop to verify the wiring before throwing parts at it.

Roy
May 26, 2012 at 1:20 AM
Avatar
SHABOOR
  • MEMBER
  • 2 POSTS
hi
Ok what should I check when I have code P0713 and could you provide sample pictures or video to help me to fined the electric connections it may cause the problem
Thank you
Jun 1, 2012 at 1:39 PM
Advertisement
Avatar
ASEMASTER6371
  • CERTIFIED EXPERT
  • 52,796 POSTS
actually, a scan tool is the best way as you can monitor the solenoid activity and manually turn them on and off to verify signals. it will be well worth the money, unless you own an actual scan tool, to let a trans shop at least check it out for you, then after the diag is done, you can decide whether to fix it yourself or let someone do it for you.

Roy
Jun 1, 2012 at 1:48 PM