fuel pump fuse abs fuse and asd relay keeps blowing as soon as battery is hooked up

what wiring harness?? where??? sounds like there is more damage there.

Roy

You mean fuse # 12, #16, # 17 and # 25 are blowing all at once?

Roy is right, you have more than what it looks. Try disconnecting whateve you have worked on and retest.

harness from battery to alternator and 02 sensor. fuse 4 for the fuel pump not sure on the other numbers.

Let me know all the fuses that are blown.

fuel pump abs asd relay

What are the numbers of the fuses?

number 3 and number 7 and the asd relay

Remove these 3 fuses. Install the battery connections. Unplug the ASD relay and install the fuse to test if it blows.

1999 and 2000 PDC are different. For 1999 fuse # 3 is not used. I need to confirm which is the correct fuse box.

number 3 counting from the top of the box is marked fuel.

Sorry, I was supposed to attach the fuse box diagrams to make sure. The location is correct but the fuse box layout are different.

which of the two layout is correct?

fig 5

According to our database that fuse is not used.

I believe you have read the fuse numbering wrongly.

The fuse you are refering to should be fuse # 16 and the ABS is # 12.

For the ABS, disconnect the controller wireharness. Check the wiring for crimping to ground.

For the Fuel pump (#16), it is connected to fuel pump relay and PCM. for ASD relay # 17), it goes to the relay and engine controls.

Check for wires being clamped below brackets etc.

we disconnected everything still blows. checked all the wires all good. it wont start just clicks. checked the started have power it

If you disconnect everything and the fuses blos, you need to check the fuse box itself. Maybe some wires are fused together causing the problem.