starter not working?

1999 CHRYSLER TOWN AND COUNTRY
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
My car wont start just clicks I've been told that its just a ground relay I just want to know where this is located?
Oct 21, 2012 at 4:33 PM
Advertisement
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Whats clicking?Also have you had the battery tested and made sure the battery cables are clean and tight? This guide can help us fix it

https://www.2carpros.com/articles/starter-not-working-repair

and

https://www.2carpros.com/articles/car-battery-load-test

Please run down these guides and report back.
Oct 21, 2012 at 4:39 PM
Avatar
JDL
  • CERTIFIED EXPERT
  • 16,098 POSTS
Check for applicable trouble codes. You have a starter relay, that isn't for ground. At the relay, terminal 30 is hot all the time. Terminal 86 goes hot with key in the crank position. Terminal 85 is ground for coil side of relay, controlled by the pcm. When relay is energized, terminal 87 carries voltage to starter. Note diagram.
Image (Click to enlarge)
Attached Media
Oct 21, 2012 at 4:45 PM
Advertisement
Avatar
JDL
  • CERTIFIED EXPERT
  • 16,098 POSTS
Hi, saturntech9, didn't see you.
Oct 21, 2012 at 4:46 PM
Avatar
SATURNTECH9
  • CERTIFIED EXPERT
  • 30,869 POSTS
Thats ok thanks for the assit my friend.
Oct 23, 2012 at 3:27 AM