1999 CHRYSLER CONCORDE
13,600 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
My heater won't get hot. It's blowing out cold air. I've checked the cooliant and its fine. The thermastate is fine. Fuses are fine as well. Even went in the glove box n checked the motor and that's working also.. I need HELP!!! It's cold out there!!! THANK YOU!!!
Nov 15, 2012 at 1:52 AM
Advertisement
Avatar
DRCRANKNWRENCH
  • CERTIFIED EXPERT
  • 3,380 POSTS
There may be air in the system or the actuator valve for the heater core is not working. To bleed air out of the system;
Remove radiator cap when car is cool and turn the heater all the way to hot setting
Allow to reach operating temp and thjen top off radiator and overflow tank
Replace the radiator cap for good measure

The actuaor valve can be found on the inlet heater hose near the firewall. You can replace it by removing clamps and actuating cable or servo motor.
Nov 15, 2012 at 2:17 AM