1999 Chevrolet Blazer running hot

1999 CHEVROLET BLAZER
70,000 MILES • 2.8L • V8 • 4WD • AUTOMATIC
Avatar
EDINGBOURGH
  • MEMBER
  • 1 POST
did a intake gasket job but still running hot
Aug 2, 2014 at 11:00 AM
Advertisement
Avatar
JDL
  • CERTIFIED EXPERT
  • 16,098 POSTS
How hot does the engine get, in degrees f? Under the hood, any obvious over-heater issues? Are you losing coolant? If you have recovery reservoir, is it filling up in a hurry and or boiling over? If your just going by the temp gage, I'd have to double check the temp gage.

Some possibilities, radiator--radiator cap--water pump--clogged coolant passage, somewhere-- thermostat? I'm sure I have left a few things out.

You may need to check for combustion gases in the coolant?
Aug 2, 2014 at 11:34 AM
Avatar
KMTECHMAN1
  • MEMBER
  • 8 POSTS
Sorry but your 2.8 is not a V8. Probably a cracked head. You can tell 2 ways. A radiator pressure tester that is a cap with a meter that you put where the radiator goes. Over 17 psi is a cracked something. Also, with a cracked head or gasket, your radiator fluid will be dark being mixed with exhaust gas an that pressure will not allow coolant to flow freely and you will run high temp. Also check your oil dipstick for evidence of antifreeze. I do not mean to dissappoint you, but these engines were problematic and I had one.

Ken
Aug 2, 2014 at 1:56 PM
Advertisement
Avatar
KMTECHMAN1
  • MEMBER
  • 8 POSTS
Oh and by the way, if you have the heads off ever, you can have them magnafluxed. It is a machine shop tool for car heads that check for cracks.
Aug 2, 2014 at 1:58 PM
Avatar
JDL
  • CERTIFIED EXPERT
  • 16,098 POSTS
Sounds good to me. Everybody have a great day.
Jun 24, 2015 at 11:02 AM