saturn sl2

1998 SATURN ASTRA
177,000 MILES • 4 CYL • 2WD • AUTOMATIC
Avatar
EDSEL
  • MEMBER
  • 2 POSTS
I just purchased a 1998 saturn sl2. oil is rising into the plugs. my mechanic friend removed the top and installed a new gasket and sealed the cover. we took it for a test drive and the oil is still rising to the top of the engine around the plugs. any suggestions.
Mar 19, 2011 at 3:36 AM
Advertisement
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
Sounds like your technician is not doing it properly-See below

NOTE: Engines are assembled with black composite cam covers.

REMOVAL

Remove Positive Crankcase Ventilation (PVC) valve hose.

Remove cam cover fasteners.
Remove the cam cover assembly.
INSTALLATION

NOTE: Inspect the cam cover isolations for cracks. Replace the isolators if deterioration exist. Gaskets over one year old may take a set and should be replaced. Gaskets under one year old do not need replacement. A small drop of RTV must be installed at the two T-joints whenever the cam cover is installed.

Install new cam cover gaskets, if removed.
Install the cam cover assembly.
Install the PVC valve hose.




Images (Click to enlarge)
Attached Media
Attached Media
Mar 19, 2011 at 3:46 AM
Avatar
EDSEL
  • MEMBER
  • 2 POSTS
I took the car back to my mechanic and apparently the problem was the pcv valve. it was stopped up. i hope this is a permanent fix. thanks for your answer as i was and still am uncertain. so far we drove it over 40 miles and no leak.
Mar 19, 2011 at 7:16 PM
Advertisement